slattach - manual page for slattach 1.31.1
slattach [-ehmLF] [-c SCRIPT] [-s BAUD] [-p
PROTOCOL] SERIAL_DEVICE
BusyBox v1.31.1 (2020-04-30 13:38:01 EDT) multi-call binary.
Configure serial line as SLIP network interface
-p PROT Protocol: slip, cslip (default), slip6, clisp6,
adaptive
-s BAUD Line speed
- -e
- Exit after initialization
- -h
- Exit if carrier is lost (else never exits)
-c PROG Run PROG on carrier loss
- -m
- Do NOT set raw 8bit mode
- -L
- Enable 3-wire operation
- -F
- Disable RTS/CTS flow control